Applications

Saving of assembly process/ Stability of quality/ Reduction of cost

Cam Stainless Steel 316L

Thread

Integrated outer or internal thread with high precision.

Cellular phone hinge　Ti-6Al-4V

Thread Stainless Steel 316L

Undercut

Complex shape with undercut is available with our special process. (It is not possible with conventional mold design.)

Connector Stainless Steel 316L

Transcription

Excellent transcription property by using fine metal powder.

		Micro Injection Molding Machine
Micro Planetary Gear Stainless Steel 316L Outside Diameter: 1.7mm Module: 0.07mm
Micro Reactor　Stainless Steel 316L Aspect Ratio:4 Minimal Structure Size: 50μm
Pinion　Stainless Steel 316L Outside Diameter: 0.85mm Number of Teeth: 10		Rack Stainless Steel 316L Length:6mm　Thickness: 0.5mm Pitch: 0.22mm
Micro Parts　Cu Outside Diameter: 2mm Weight: 0.007g

Hot Runner

There are two types of injection molding system,
hot runner and cold runner.

	Sproe, Runner Molding Cycle Mold Cost Suitable Production Lot Necessary Long Low Up to 100,000 pcs.per month Not necessary Short High Over 100,000 pcs. per month

Hot runner system with one cavity corresponds cold runner system with four cavities because hot runner system does not generate sprue or runner, and reduces molding cycle time.
For mass production with high precision, hot runner system is advantageous.
(Multi cavity of a mold set may be cause of unfavorable dimensional inhomogenity of the final products.)

<<Applications